进口蒸发循环泵
进口强制循环泵｜进口冷却水循环泵｜进口轴流式循环泵
进口蒸发循环泵特点：
1、慢速型：泵运转平稳；过流件磨损轻、寿命长；晶体破损度低，适合于蒸发结晶工艺。
2、悬臂式转子：与双支撑式相比，轴封数量减半，泵重量轻、外形尺寸小，检修方便。
3、泵体中心支撑：与泵体底脚支撑式相比，转子热对中性好。
4、后开门结构：不拆泵体进出口法兰，即可抽出转子，检修方便、迅速。
5、蒸发器无膨胀节：可供弹性泵底座或悬挂式泵，热补偿可靠，减少蒸发器投资。
进口蒸发循环泵技术参数：
流量：300-12000m3/h 扬程：2-5m 口径：25-1000mm
转速：380-980r/min 功率：4-200kw 工作压力：1MPa 工作温度：≤170℃
注：用户应提供详细的数据表，根据要求的流量、扬程、介质特性，推荐合理的泵
进口蒸发循环泵的安装方式：
取决于蒸发工序和结晶工序设备的布置，以下安装图表中仅列出各种型号循环泵中配一种电机的尺寸，根据用户所需的流量、扬程、转速和介质的比重，我厂将配用不同的电机，安装尺寸将有局部变动（泵部分尺寸不变），本厂将针对具体工程项目提供正式的循环泵安装尺寸图。
1、 直联型
循环泵与电机通过挠性联轴器直联，安装在公用底座上。
2、 皮带传动型
循环泵和电动机用三角皮带传动，易于调节泵的性能参数。
3、 弹性泵底座
在公用地坐下方设置可调负荷式弹簧盒，可用直联型和皮带传动型。
进口蒸发循环泵工作原理：
蒸发循环泵输送液体不是依靠叶轮对液体的离心力，而是利用旋转叶轮叶片的推力使被输送的液体沿泵轴方向流动。当泵轴由电动机带动旋转后，由于叶片与泵轴轴线有一定的螺旋角，所以对液体产生推力(或叫升力)，将液体推出从而沿排出管排出。当液体被推出后，原来位置便形成局部真空，外面的液体在大气压的作用下，将沿进口管被吸入叶轮中。只要叶轮不断旋转，泵便能不断地吸入和排出液体。
进口蒸发循环泵应用领域：
磷肥厂、拜尔法氧化铝厂、隔膜法烧碱厂、芒硝厂、湿法冶金厂、联碱厂、纯碱厂、轻工行业、电厂、造纸场
进口蒸发循环泵德国巴赫BACH售后服务：
用户第一，信誉第一，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。
选择德国巴赫的四大理由：
1：进步性 持续性
回顾巴赫在中国的快速进步性 每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。
2：可靠性
德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量， 均经过严格的全面测验。 这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，最优质服务的原因。
3： 价格
现代化工厂高端自动化数控生产线确保阀门与其配件价格合理，品质优良。
和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。
4：客户价值观
通过集中采购 可以降低总体的采购成本。
便捷的采购，有助于客户优化配置人力资源，达到精简高效。
借助巴赫充足的库存最小化客户的库存投入。
高品质的阀门将帮助避免因伪劣产品而导致的停产 停工 误工。
Inlet evaporator circulating pump
Characteristics of imported evaporative circulating pump:
1. Slow type: the pump runs smoothly; Wear light, long life; The crystal damage is low, suitable for evaporation crystallization process.
2. Cantilever rotor: with double support, the number of axle seals is halved, the pump is light, the shape is small, and the maintenance is convenient.
3. Pump center support: the rotor heat is better than the pump body base support type.
4. Rear door structure: no open pump body inlet and outlet flange, can draw the rotor, easy to overhaul, quick.
5. Evaporator free expansion joints: can be used for flexible pump base or suspension pump, heat compensation is reliable, and reduce evaporator investment.
Technical parameters of imported evaporative circulating pump:
Flow: 300-12000m3 / h head: 2-5m diameter: 25-1000mm
Speed: 380-980 r/min power: 4-200 - kw work stress: 1 mpa working temperature: 170 ℃ or less
Note: the user should provide detailed data table, according to the requirement of flow, lift, medium characteristics, recommend reasonable pump
Installation of imported evaporative circulating pump:
Depends on the evaporation process and crystallization process equipment layout, installation in the chart below lists various type of circulating pump with only one kind of the size of the motor, according to user needs to flow, lift, speed, and the proportion of medium, our factory will be different motor, installation dimensions will have local changes (pump parts size remains the same), our factory will provide formal circulation pump for specific project installation size chart.
1. Direct contact type
The circulating pump and motor are directly connected by flexible coupling and installed on the common base.
2. Belt transmission type
The circular pump and motor are driven by triangle belt, which is easy to adjust the performance parameters of the pump.
3. Elastic pump base
Set adjustable load type spring box on the utility floor, which can be directly connected and belt driven.
Principle of imported evaporative circulating pump:
The evaporating circulating pump does not depend on the centrifugal force of the impeller to the liquid, but the thrust of the rotating impeller blades makes the transported liquid flow along the axial direction of the pump. When the pump shaft is driven by the motor, it produces a push (or lift) to the liquid, resulting in a push (or lift) of the liquid, resulting in the ejection of the liquid. When the liquid is released, the original position forms a partial vacuum. The liquid outside will be sucked into the impeller through the inlet tube under atmospheric pressure. As long as the impeller keeps spinning, the pump can continuously inhale and expel the liquid.
Application of imported evaporative circulating pump:
Phosphate fertilizer plant, bayer oxidation aluminum plant, diaphragm caustic soda plant, mir-nitrate factory, wet metallurgical plant, alkali factory, pure alkali factory, light industry, power plant, paper making field
German BACH BACH after sales service:
The user first, credit first, high quality, perfect after-sales service is an extension of the value of our products and the important guarantee for the interests of the customer, my company's service tenet is: quality management system to establish and constantly improve the scientific, reasonable and efficient service quality management system, fair, accurate and timely complete customer after-sales service quality assurance work, for my company's customer service build good, comprehensive, full service system.
Four big reasons to choose Bach in Germany:
1: progressive sustainability
Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.
2. Reliability
The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.
3: price
Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.
And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.
4: customer values
Centralized procurement reduces overall procurement costs.
Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.
Minimize customer inventory by using Bach's ample inventory.
High quality valves will help to avoid downtime due to shoddy products.