进口潜水式排污泵
进口潜水排污泵产品概述：
固定式自动安装采用泵与耦合装置相连。耦合装置由底座、固定于底座上的转接管道、垂直固定于底座上的双导轨、连接转接管道与潜水泵的自动耦合器等组成。耦合底座固定在泵坑底部（在建造污水坑时，预先安装好地脚螺栓，使用时将耦合底座固定），在潜水泵的底端面固定设置两侧带有凹槽的定位架板，底座延伸至潜水泵下方，垂直固定于底座上的双导轨设置为分别嵌装入定位架板两侧凹槽内并与凹槽滑动配合的支柱导轨，两支柱导轨上端固定设置安装起重吊具的承重横梁支架。在承重横梁上附加起重吊具，如电动葫芦，即可方便地 进行潜水泵的上提及下送，免去了手工操作的高强度消耗及安装吊装架等设施的复杂过程，使潜水泵的维修、更换作业简便，节省人力，提高效率，降低作业成本。 泵在导轨上移动，放下泵时，耦合装置自动地与耦合底座耦合；提取泵时，泵与耦合底座会自动脱落。
进口潜水排污泵技术参数：
流量：3m3/h～1800m3/h 扬程：2m～66m 功率：0.55kW～110kW
液体温度：0℃～+40℃ 频率：50Hz
进口潜水排污泵应用领域:
1、工厂、商业严重污染废水的排放。
2、城市污水处理厂排水系统。
3、住宅区的污水排水站。
4、人防系统排水站、自来水厂的给水装置。
5、医院、宾guan的污水排放。
进口潜水排污泵工作条件：
1、介质温度不超过60℃，介质重度<1.2kg/m3，抽送介质的颗粒含量重量比不大于60%，抽送介质的PH值为4-10。
2、无内自流循环冷却系统的泵，电机部分露出液面不超过电机的1/2。
3、泵主要零件的材质为耐磨铸铁，所以不能用于抽送强腐蚀性介质，如需抽送强腐性介质，请说明使用条件和要求，进行特殊定货，我们将针
对性为您设计、服务
进口潜水排污泵特点：
1、采用独特的单、双流道式叶轮结构，大大提高了污物通过能力，能有效地通过泵口径的5倍纤维物质，与直径为泵口径约50%的固体颗粒，并
且增加了搅拌装置，能将沉积物一并有效的排出。
2、机械密封采用双端面密封或双层型式，并使其长期处于油室内运行，材质取用新型硬质耐腐的碳化钨材料，可使泵安全连续运行8000小时以上。
3、泵整体结构紧凑，体积小、噪音低、节能效果显著，检修方便，无需建泵房，潜入水中即可工作，大大减少工程造价。
4、电泵内设有过热或过电流保护装置，防止电机过载发热，可根据用户要求设置漏电保持装置。
5、可根据用户需要，配备全自动安全保护控制柜，对泵的漏水、漏电、过载及超温度进行监控，保证泵运行的安全性和可靠性。
6、浮球开关可根据所需的液位变化，自动控制泵的起动和停止，无需专人看管，使用极为方便。
进口潜水时排污泵德国巴赫BACH售后服务：
一流的服务铸就一流的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
选择德国巴赫的四大理由：
1：进步性 持续性
回顾巴赫在中国的快速进步性 每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。
2：可靠性
德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量， 均经过严格的全面测验。 这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，最优质服务的原因。
3： 价格
现代化工厂高端自动化数控生产线确保阀门与其配件价格合理，品质优良。
和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。
4：客户价值观
通过集中采购 可以降低总体的采购成本。
便捷的采购，有助于客户优化配置人力资源，达到精简高效。
借助巴赫充足的库存最小化客户的库存投入。
高品质的阀门将帮助避免因伪劣产品而导致的停产 停工 误工。
Imported submersible sewage pump
Overview of imported submersible sewage pump products:
Fixed automatic installation using pump and coupling device. The coupling device consists of a base, a connecting pipe fixed on a base, a double guide rail that is fixed to the base, and the automatic coupler of a submersible pump. Coupling the base fixed on pump bottom (when building sump, installed anchor bolt in advance, when using the coupling base fixed), ends fixed Settings on both sides of the groove in the bottom of a submersible pump of the positioning of the plate, the base extend to below the submersible pump, vertical to the base of double guide rail is set to respectively embedded into the positioning plate with sliding grooves on both sides of the slots with the backbone of the guide rail, two pillars of guide rail top fixed installation lifting sling bearing beam bracket. In bearing beam attached lifting sling, such as electric hoist, can easily reference to send for submersible pump, the manual operation of high strength consumption and hoisting installation facilities such as complicated process, make the submersible pump repair, replacement operation is simple, save manpower, improve efficiency, reduce the operation cost. When the pump is moving on the guide rail, the coupling device is automatically coupled to the coupling base when the pump is lowered. When extracting the pump, the pump and coupling base will fall off automatically.
Technical parameters of imported submersible sewage pump:
Flow: 3m3 / h ~ 1800m3 / h yangcheng: 2m ~ 66m power: 0.55 kW ~ 110kW
Liquid temperature: 0 ℃ ~ + 40 ℃ frequency: 50 hz
Application of imported submersible sewage pump:
1. The discharge of waste water from factories and commercial serious pollution.
2. Drainage system of urban sewage treatment plant.
3. Sewage drainage station in residential areas.
4. Water supply device of the human defense system drainage station and waterworks.
5. Sewage discharge from hospitals and hotels.
Working conditions of imported submersible sewage pump:
1, medium temperature less than 60 ℃, medium heavy < 1.2 kg/m3, pumping medium particles content weight ratio not greater than 60%, the pumping medium PH value of 4 to 10.
2. The pump of the non-internal self-flow circulating cooling system, the part of the motor exposed shall not exceed 1/2 of the motor.
3, the material of main parts for the pump wear resistant cast iron, and so cannot be used for pumping strong corrosive medium, such as pumping strong corrosion medium, the using conditions and requirements, please indicate special order, we will
Design and service for you
Characteristics of imported submersible sewage pump:
1, adopt unique single, shuangliu impeller structure, greatly improving the sewage through the ability, can effectively through the pump five times the fiber material, about 50% of pump diameter and solid particles, and
The mixing device is added and the sediment can be effectively discharged.
2, mechanical seal with double end face seal or double type, and make it run in the oil chamber for a long time, the material use new hard decay resistance of tungsten carbide material, can make the safe running more than 8000 hours continuously.
3. The pump has a compact overall structure, small volume, low noise, remarkable energy saving effect, convenient maintenance, no need to build the pump room, and can work in the water, greatly reducing the project cost.
4. The electric pump is equipped with overheating or over-current protection device, which prevents the motor overload and heating, and can set up the leakage retaining device according to the user's requirements.
5. It can be equipped with automatic safety protection control cabinet according to the user's needs, and monitor the water leakage, leakage, overload and super temperature of the pump to ensure the safety and reliability of the pump operation.
6. The float switch can automatically control the starting and stopping of the pump according to the required level of liquid level, and it is very convenient to use.
German BACH BACH after-sales service:
First-class service casts the first-class enterprise to make the customer have no worries.
1. Supply the certificate of qualification, nameplate, inspection report, certificate of origin and installation instruction of the products according to the contract requirements.
2. In the process of acceptance of the products, if the customer is not in conformity with the contract requirements, we shall give the customer the treatment within two hours after receiving the notice from the customer.
3. We provide the product quality guarantee period of over 12 months, and the time will be calculated from the date of acceptance.
4. With the correct installation and use, the company will be responsible for the product quality problems.
Four big reasons to choose Bach in Germany:
1: progressive sustainability
Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.
2. Reliability
The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.
3: price
Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.
And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.
4: customer values
Centralized procurement reduces overall procurement costs.
Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.
Minimize customer inventory by using Bach's ample inventory.
High quality valves will help to avoid downtime due to shoddy products.