进口立式管道泵
进口立式管道泵产品特点：
叶轮直接安装在电机的加长轴上，轴向尺寸短，结构紧凑，泵与电机轴承配置合理，能有效地平衡泵运转产生的径向和轴向负荷，从而保证了泵的运行平稳，震动噪音低。
轴封采用机械密封或机械密封组合，采用进口钛合金密封环、中型耐高温机械密封和采用硬质合金材质，耐磨密封，能有效地增长机械密封的使用寿命。
安装检修方便，无需拆动管路系统，只需卸下泵联体螺母即可抽出全部转子部件。
可根据使用要求即流量和扬程的需要采用泵的串、并联运行方式。
可根据管路布置的要求采用泵的竖式和横式安装。
进口立式管道泵应用领域：
供输送不含固体颗粒，具有腐蚀性，粘度类似于水的液体，适用于石油、化工、冶金、电力、造纸、食品、 制药和合成纤维等部门
进口立式管道泵工作条件：
吸入压力≤1.0MPa，或泵系统最高工作压力≤1.6MPa，即吸入口压力+泵扬≤1.6MP泵静压试验压力为≤2.5MPa，订货时请注明系统工作压力。泵系统工作压力大1.6MPa时应在订货时另行提出，以便在制造时泵的过流部分和联接部分采用铸钢材料。 2.环境温度＜40℃，相对湿度＜40% 3. 所输送介质中固体颗粒体积含量不超过单位体的0.1，粒度＜0.2mm。
进口立式管道泵技术参数：
最大流量：600m3/h最高扬程：155m
额定转速：1450~2900rpm(50HZ)，1750~3500rpm(60HZ)
额定温度：-10℃~105℃ 最大工作压力：1.6MPa
进口立式管道泵德国巴赫BACH售后服务：
一流的服务铸就一流的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
选择德国巴赫的四大理由：
1：进步性 持续性
回顾巴赫在中国的快速进步性 每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。
2：可靠性
德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量， 均经过严格的全面测验。 这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，最优质服务的原因。
3： 价格
现代化工厂高端自动化数控生产线确保阀门与其配件价格合理，品质优良。
和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。
4：客户价值观
通过集中采购 可以降低总体的采购成本。
便捷的采购，有助于客户优化配置人力资源，达到精简高效。
借助巴赫充足的库存最小化客户的库存投入。
高品质的阀门将帮助避免因伪劣产品而导致的停产 停工 误工。
Import vertical pipe pumps
Characteristics of imported vertical pipe pumps:
Impeller installed directly on the extension of the motor shaft, short axial dimensions, compact structure, the pump and motor bearing reasonable configuration, can effectively balance the radial and axial load of pump operation, so as to ensure the smooth operation of the pump, low vibration noise.
Adopting the combination of mechanical seal or mechanical seal shaft seal adopts imported mechanical seal and sealing ring, medium, high temperature resistant titanium alloy using hard alloy material, wear-resistant sealing, can effectively increase the service life of mechanical seal.
The installation and overhaul is convenient, without the removal of the pipe system, the entire rotor parts can be removed by removing the pump assembly nut.
According to the requirement of use, the flow and the lift need to use the pump series, parallel operation mode.
The vertical and horizontal installation of the pump can be adopted according to the requirements of piping layout.
Application field of imported vertical pipe pump:
It is used in petroleum, chemical industry, metallurgy, electric power, paper making, food, pharmaceutical and synthetic fiber etc
Working conditions of imported vertical pipe pump:
The suction pressure is less than 1.0 MPa, or the maximum working pressure of the pump system is less than or equal to 1.6 MPa, i.e., suction inlet pressure + pump lift is less than or equal to 1.6 MP pump static pressure test pressure is less than 2.5 MPa. Please indicate system working pressure when ordering. When the pump system is under pressure of 1.6 MPa, it shall be put forward separately when ordering, so that cast steel materials are used in the overflow part and the connecting part of the pump. < 2. Environmental temperature 40 ℃, relative humidity < 3. 40% solids volume content in the medium is not more than 0.1, the unit body size < 0.2 mm.
Technical parameters of imported vertical pipe pump:
Maximum flow: 600m3 / h maximum lift: 155m
Rated speed: 1450 ~ 2900rpm (50HZ), 1750 ~ 3500rpm (60HZ)
The rated temperature: - 10 ℃ ~ 105 ℃ maximum working pressure: 1.6 MPa
Import vertical pipe pump German BACH after sales service:
First-class service casts the first-class enterprise to make the customer have no worries.
1. Supply the certificate of qualification, nameplate, inspection report, certificate of origin and installation instruction of the products according to the contract requirements.
2. In the process of acceptance of the products, if the customer is not in conformity with the contract requirements, we shall give the customer the treatment within two hours after receiving the notice from the customer.
3. We provide the product quality guarantee period of over 12 months, and the time will be calculated from the date of acceptance.
4. With the correct installation and use, the company will be responsible for the product quality problems.
Four big reasons to choose Bach in Germany:
1: progressive sustainability
Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.
2. Reliability
The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.
3: price
Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.
And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.
4: customer values
Centralized procurement reduces overall procurement costs.
Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.
Minimize customer inventory by using Bach's ample inventory.
High quality valves will help to avoid downtime due to shoddy products.