HW-S30山地钻机
mountain drill rig
HW-S30型液压山地钻机是本公司开发的具有自主知识产权的系列产品。
山地工程钻机系列产品广泛地用于石油钻井勘探、地质勘察、中小型矿山及交通、国防、水利等工程的石方钻凿爆破孔以及其它用途的钻孔。
HW-S30型液压山地钻机主要特点：
1.严格按照通用工业设计标准的要求进行设计，产品零配件、模块单元的通用性、互换性强。
2.采用全液压工作方式和扣式调整装置，因而结构简单，操作方便。
3.液压站采用变量泵，因而使整个液压系统优化，具有省能源、小型化、低成本的功能。
4.采用液压快速提钻杆设计，省去了钻塔，卷扬机和变速箱，从而使操作更简便，安全性更好。
HW-S30 Hydraulic mountain drill rig is a series of products developed by the company with independent intellectual property rights.
Mountain drilling rig are widely used in oil drilling exploration, geological exploration, small and medium-sized mines and transportation, defense, rock Drilling and blasting hole in water Conservancy engineering, etc.
.
MAIN FEATURES:
1.Designed in strict accordance with the requirements of general industrial design standards, Product Parts, Module unit versatility, interchangeable.
2.Adopt full hydraulic working mode and buckle type adjustment device, So the structure is simple, easy to operate.
3.Variable pump used in Hydraulic station, So that the entire hydraulic system optimization, with energy-saving, small, low-cost functions.
4. The hydraulic quick lift drill pipe design eliminates the derrick, hoist and gearbox, which makes the operation simpler and safer.
HW-S30技术参数
HW-S30 Technical parameters
|
机 型Model
|
HW-S30
|
|
钻 井 深 度 Drilling depth
|
30m
|
|
钻 井 方 法 Drilling method
|
气动震击钻井 pneumatic hammer drilling
|
|
螺旋钻井及泥浆钻井（备选）Screwdrilling and mud drilling（alternative）
|
|
钻孔(成孔)直径(mm)Drilling diameter
|
气动震击钻井 pneumatic hammer drilling
|
岩石地层rock70-90，松散地层soil75-95
|
|
75-90
|
|
钻杆（直径×长度）drill rod(Dia*Length)
|
气动震击钻井(mm) pneumatic hammer
drilling
|
Φ60×1500
|
|
动力头 Power head
|
额定扭矩(N.m)Torque
|
800-900
|
|
钻速范围(r/min)Drilling speed
|
0-135
|
|
钻机加压及提升功能 Drilling pressurization and lifting
|
给进加压力(N) Feed pressure
|
5500-6000
|
|
钻具提升力(kN)Lifting power
|
12-16
|
|
钻具最大升降速度(m/s)Max lifting speed
|
0.71-0.81
|
|
主机发动机功率(kw)/转速(r/min）Main engine power/speed
|
26/3600
|
|
液压系统hydraulic system
|
流量(L/min) Flow
|
0-60
|
|
工作压力(Mpa)Working pressure
|
20
|
|
空压机组air compressor
|
机 型/配置数量Type/Quantity
|
活塞式/1组Piston/1 unit
|
螺杆式Screw
|
|
流量(m3/min)Flow
|
3.5
|
3.8
|
|
工作压力(Mpa)Pressure
|
0.8
|
|
发动机功率(kw)/转速(r/min） Engine power/speed
|
26/3600
|
以上参数如有改动，恕不另行通知?（Any change of the parameters mentioned above can be made without prior notification.)