2主要結構 Main structure

         ZLP系列平模造料機主要由主電機、支撐架、螺旋減速機、皮帶輪罩、

         料倉進料口、螺旋餵料機、壓緊螺母、軟連接、水汽接口、進料高度調節裝置、

         人工加料口、成型倉蓋、成型倉、壓輥總成、輥模間隙調整器、平模、出料口、

         主減速器等組成。

         ZLP series flat die granulator is mainly made up of main motor,  

         support frame,Screw reducing gear, Belt wheel casing, feeding hole, Screw

         feeding machine, gland nut, soft connection, Moisture connector,

         feeding height adjustment device, Artificial add hopper,forming bin cover,

         forming bin, roller, roller assembly, roller die gap adjuster, flat die model,

         Discharge hole, Main reducing gear, etc.

 5.3工作原理 Working Principle

     合格的原材料經螺旋餵料機變頻控制，把原料勻速喂進成型倉，調節成型倉蓋

     上的進料高度調節裝置，使原料在成型倉的中間進料，原料經壓輥壓縮到平模

     的成型腔體，出來的顆粒經拔出料裝置掃至出料口。

     Qualified raw materials are frequency controlled by the screw feeding machine,

     put the raw materials uniform feeding into the forming bin,to adjust the feeding

     height adjustment device on the forming bin cover,make the raw materials feeding

     through middle of the forming bin,raw materials by the roller compression to the flat

     die cavity body,then pellets through extract material device sweep to discharge hole.

     成型腔體為啦叭形，上面大中間小，最後再變大，原料在成型腔內受體積變小

     壓縮及摩擦力的綜合作用上把粉狀小顆粒擠壓成型。

         The cavity body is La puff shape,upper is big,middle is small,and then

         getting bigger,raw materials in the cavity by smaller volume compression and

         friction force extrusion forming into pellets.